Opilc concrete is a modern building composite material, which consists of cement-sand mortar, sawdust of various conifers of wood, mineral binders, as well as lime or clay.
Positive sides of the house made of opilcoton
– Opilco -concrete blocks have unique qualities such as excellent frost resistance, vapor permeability, fire resistance, strength, durability and landing.
– Another important advantage is environmental purity, that is, this material is made only from environmentally friendly components.
– Also, a house made of opilco concrete will have excellent properties of thermal insulation and sound absorption, the internal microclimate in the house will be excellent, and the level of comfort is high.
– Due to its properties, this material is classified as increased strength, that is, the house built from it will be really very durable, reliable and persistent.
– The walls from it will have indicators of strength close to the stone, and its thermal conductivity is even better than that of wood, also the weight of this material is quite low.
Opilc concrete easily lends itself to processing, that is, it is easily cut and drilled, nails are driven without problems, and its scope is quite wide and it is used both in monolithic construction and in low -rise construction.
Construction moments of a house made of opilca concrete
Walls from blocks have significant resistance to mold and fungus, they are not susceptible to decay and have excellent resistance to atmospheric effects.
Each three rows of masonry, a reinforcing mesh of a wire covered with bitumen and a diameter of 5 mm on average is installed.
Opilc concrete is a moisture -resistant material, so the plaster of the walls outside is required and it is carried out 3 months after the house is built.
The walls can also be faced with facial bricks or finished with facade special panels or even simple ceramic tiles.
The base must be made of waterproof material, for example, such as slag concrete or brick.
Opilc concrete itself can be brands M 5, m 10, m 15, m 25, cement for its manufacture is mainly used 400 brands, and blocks are obtained with a density of 500 to 950 kg/m3 on average.
It is best to build from ready -made dry blocks, it will be quite difficult to build a house using monolithic technology, an open -concrete ordinary mixture freezes for a very long time and can be deformed at the same time.