Oblivion of this possibility leads to tragic consequences. Driver p. Before turning to the left, I did not reduce the speed of the machine in a timely manner. He hoped that the large radius of the rotation, which ensured the size of the intersection, would allow it to freely perform this maneuver, especially since at that time there were no cars moving towards. But here p. I noticed a bus standing a few meters from the intersection. The driver was at the back of the bus and eliminated the engine malfunction. Seeing that the bus will prevent him from unhindered to turn, p. sharply turned the steering wheel to the left and pressed the brake. The car was brought and she knocked down the bus driver.
The skid can occur if the road has even a slight transverse slope. Then the weight of the car seeks to move it towards the slope of the road,
Can cause the car and other reasons. You can often see how, during ice on the road, drivers try to go “in prize” to the curb, where the road is not so rolled up by car tires. At the same time, the right wheels experience more resistance than the left, and the car seeks to turn towards these wheels. The same thing turns out if the air pressure in the tires is not the same or if, when braking the wheel of one side, inhibit more strongly than the wheels of the other side. That is why it is impossible to drive a car, the brakes of which are not thoroughly adjusted, and the pressure in the tires does not correspond to the norm. Especially, the drift should beware if the tire tread is already worn out.
It is better not to allow, but if it still arises, do not get lost: in no case do not slow down and turn off the clutch – this is the right accident. You should quickly, but smoothly turn the steering wheel towards the drift of the rear wheels of the car and at the same time smooth the accelerator pedal smoothly. After stopping the drift, at the time of alignment of the car, turn the steering wheel in the opposite direction and only after that you can use the brakes, but you should slow down without turning off the clutch, smoothly, often pressing the pedal. All operations must be performed quickly, but in no case sharply.