A fairly important procedure that good masters are usually carried out right before starting directly to the installation, a dry layout is considered. In accordance with the technology of styling, the slabs should be laid out on the floor, selecting their most optimal combination not only in color, but also in the figure along with the degree of brightness of the color. It is worth noting that in fact – this is a rather complicated and at the same time labor -intensive process, since natural stone is precisely living material. Each of its tiles has a simply unique pattern, while the variegated stones in some cases may well change the general tone or pattern. Dry layout is really very important and because it can allow you to see how the seams will be associated in the final result. In the event that the master sees that they may not match, then some points will have to be cut or on the contrary add. Immediately after the customer completely approves the layout, the plates begin to marke, while the gradual laying process begins.
It is very important to remember that natural stone is best to lay with the seams. There are several reasons for this. The first reason is that even with the maximum accurate processing of natural stone tiles, some technological tolerances can still be allowed. In the event that if the tiles are laid without the direct presence of seams, then after about ten plates of one row you will definitely get a displacement of the picture, which simply cannot be allowed. The correct seams at one time allow you to adjust the displacement of the lines of the picture, which very often occurs due to some technological tolerances in accordance with the size of the tiles.
