For cars with a body like sedan subwoofer, you can install not only on the rear shelf, but also in a special window located under the armrest of the rear seat. Most cars have a window. As for the rear shelf, here you can also use any type of acoustic design. The main requirement for installation is the availability of the desired window size in which the subwoofer should fit with the phase intelligence. If the phase inverter is not placed in the window, it is not recommended to transfer it to another place, since there will be large loss of bass. In such a situation, you need to change the structure of the phase inverter. There is another option to install several subwoofers under the rear seats. In this case, you will have to organize a dense plate behind the seats, into which the laminals will be mounted. Installation of a subwoofer in a machine with a case type of station wagon or hatchback is the simplest, since this case has no distinction between the interior and the trunk. The boom can be installed directly in the trunk and at the same time get very good basses. The most optimal acoustic design for a given car body is a closed type, a case with a phase -inverter and a lane type. And if you love yourself and your car, you just need to visit the online store of tires and disks Maxshina, which can offer you a large assortment of automobile discs and tires Kharkov. Installation of a subwoofer in a car with a body of type convertible is not so simple, since the case of the machine is open. The complexity of the installation is to find the required place. The most optimal acoustic design for the convertible is the case with a phase inverter or a lane case.