Technique
Laser printers differ from jet and mechanicals with a more complex device. They have a large number of programs that can fail from time to time. Repair of such printers is more complicated than the repair of mechanical and jet models. That is why experts recommend trusting the repair of laser printers only to professionals. For this purpose, you need to contact a specializing store, where a specialist will be able to accurately determine the cause of the breakdown of this technique. As a rule, in such stores, any printer can be repaired, for example, repair of the Xerox, Minolta, Toshiba, Oki, Kyocera, Lexmark, Sharp, Canon, Xerox, Samsung, Epson, HP, etc. Service centers also provide printers maintenance, which will reduce the possibility of a breakdown of equipment to a minimum.
Let’s figure out what breakdowns most often appear in laser printers, as well as how to eliminate them.
The printer prints with black spots
In this case, such a problem is associated with pollution of mechanics. To solve it, it is necessary to carry out preventive work. As a rule, this work is trusted by employees of specializing centers who know well how mechanics are cleaned of pollution. In addition, they have special tools and tools that allow them to quickly cope with mechanics pollution.
Fault of the photo bank
There are often cases when black spots and defects appear on printed paper in a certain sequence. This suggests that the photo bank was damaged. As practice shows, it cannot be repaired, but only replace it. As a rule, it is enough for four or five gas station refueling, then a new.
Toner crumbles from printouts
If the stove is out of order, then toner will be lubricated from the sheet with a leaf. It can be lubricated, crumbled from printouts or bake a toner poorly. There are times when the stove is subject to repair, but in most cases you have to buy a new. In this case, only a service center can solve the problem, which has the necessary spare parts and qualified specialists.
White stripes on paper
If white stripes appear on paper, then the toner in the laser printer ends. Иногда причиной появления таких полос является загрязнение блока передачи заряда. This, in turn, leads to the impossibility of the appearance of an electricity charge, which is needed to cure toner from cartridges.
