As you know, after the construction of the walls, it is necessary to start installing the roof. Of course, a person who is not a builder is difficult to carry out the correct overlap. However, it is on this work that the roof of a residential building or any other structure will become directly durable and reliable.
Each builder knows that the implementation of a basement is possible only if there is a cold underground. The use of dried beams is mandatory, which will perform the functions of supporting elements. The most suitable are coniferous or deciduous rocks. In this case, there should be completely absent cracks or places with rot. As a rule, they use beams, both round and rectangular cross -section. How long the span is how thick and high the beams should be.
In addition, you need to finally decide on the choice of roofing material. For example, you can use tiles. Currently, the composite tiles from Girardroof are deservedly popular. This is due not only to the highest quality of this material. The fact is that the houses under the tiles really look very attractive.
It is also necessary to know that brick and stone walls should have special niches that are designed to install beams. Their depth should be approximately 20 centimeters, and the width should exceed 15 centimeters. The end of each beam should be sawn off. The angle was drunk, while it is 60 degrees. In this case, they will not touch the back walls of the niches. To process the ends of the beams, you should use hot bitumen. In addition, they must be wrapped in roofing material.
A prerequisite is also the presence of a support site on which a browned board of small sizes will be laid. After the installation of the beams is completed, it is necessary to use mineral wool, with which the space is filled. In addition, it is necessary to make sure that it is grouted using a concrete solution.