Then the floors of thermoplastic resins followed, and at all, recently, floors with polyhlorvinyl coated.
Over the next ten years, we will witness the appearance (massively) of the half -soft sexes. These will not be carpets in the old sense of the word, but soft materials saturated with various resins; These floors will be very beneficial for industrial enterprises in many respects. Therefore, the need for a car cleaning car is very great. To ensure sufficient performance, these machines should sweep and clean (vacuum) carpets with a capture width of at least 50 cm; If necessary, they must provide carpet washing. The main difference between these machines is the use of cylindrical brushes instead of conventional disk; since these machines should raise the carpet pile during processing, and not be crushed, it. When washing the carpet due to this construction of brushes, the detergent agent reaches the surface of the carpet in the form of pre -prepared foam, which prevents the absorption of a large amount of moisture by carpet.
An important stage is also the laying of sewage. And if you have problems with this system, then experienced craftsmen are ready to repair the sewage system quickly and efficiently.
When choosing a suitable type of machine, all kinds of misunderstandings are sometimes noted, but the basic principle when choosing cars should be simple – the larger the machine, the better. The width of the capture of the machine is limited to factors such as the width of the doors, the presence of heavy furniture and heavy equipment, the load on the floor, the presence of elevators and storage locations.
Thus, a large car wins in time at a small car almost seven times.
If we assume that light and portable furniture are in the room, then the most effective and economical method of cleaning floors in such a room will be cleaning all the furniture and the use of the most powerful machine.
There is very good reason to believe that for an industrial machine, the minimum capture width should be 48 cm. A light car with a low speed of rotation of brushes for cleaning a highly contaminated floor should sometimes work either very intensively, or make several visits in the same area.