At the moment, the heating system to ensure its work at the expense of natural gas revenues needs significant financial investments. Payment of such housing and communal services was expensive for the earlier, but today, due to a significant raising of prices for familiar tariffs, only the richest will live in warmth and dryness and dryness. Awareness of this state of affairs forces everyone to think about how cheaper to warm this winter?
Water furnaces for the house – real salvation. They are a universal device for the effective heating of premises of any type of both residential and industrial. Modern models were able to combine the functions of the boiler and titanium. Which allowed them to actively use them in private apartments, cottages, cottages or workshops, garages, folding and industrial buildings.
The most important thing is that you need to know when choosing – water furnaces for the house can be of different capacities. Be sure to pay attention to this moment to understand whether the aggregate is enough for the resources in order to normally heat your housing area. If it is difficult to make such calculations yourself, seek help from experienced specialists.
Design features
Water furnaces for the house necessarily in their composition have a high -quality heat exchanger, which is usually built into the chimney channel, and sometimes can be placed in the furnace. The material of their basics is a special boiler steel. Sometimes in the production process is used additionally also cast iron. The structure of the equipment implies that the whole essence of heating is realized under constant pressure pressure.
Water furnaces for the house can be used both as additional and as the main heat source in the rooms.
Heat exchanger is the most important part of the entire configuration. Usually it is inside the heater itself. The structure of the heat exchanger is different. Most often, during its manufacture, sheet steel and pipe from high -quality metal are involved.
Standard steel thickness (sheet) is about 3-5 millimeters. The simplicity of processing and ease of care determine the popularity and demand for this material. The surfaces of the product can be cleaned of the settling elements of combustion without much difficulty.
The register monitors the achievement of the maximum possible temperature, followed by ensuring its uniform circulation. The process of direct heating occurs due to the fact that very warmed gases are rapidly passing through the channels of a special tank for heating, thus they carry out all the heat of the water. If the model is equipped with several reservoirs, the level of efficiency increases significantly.