The decoration of the apartment from the inside is a very difficult, but an interesting process, which, usually, is divided into several stages. First they develop a plan and carry out preparatory training, and only then begin to engage in finishing work.
Wall plaster is carried out at the preparatory stage. The plastering of the walls should be paid to very important attention, because plaster is the basis with which then you will have to work in the future. The stucco is best held on rough walls, so sometimes scratches, notes, etc. are specially applied to the even surface. The walls are plastered with a cement or a special solution of cement and limestone. After applying the plaster to the walls, putty work is carried out.
After plaster, you can improve the condition of the walls by shearing them with panels made of wood fiber or plywood. Some popular chipboard is better not to use residential premises, as they can distinguish harmful chemical compounds. Wood chips can be laid on the floor if a further catch is planned with linoleum or laminate.
In order for the interior decoration of apartments to be successful, it is very important to comply with all the norms and rules of finishing work. The plaster on the walls should lie in an even layer, there should not be any recesses, depressions and even roughnesses. Before laying the flooring, you must make sure that the cement screed is completely dry. Already at the draft stage, you must clearly imagine where household appliances will be located in the apartment, this will help to better navigate during an electrician. When performing all plumbing work in the apartment, you need to strictly adhere to a pre -developed project.
The initial stage of finishing work is a very important stage, because if you allow a number of inaccuracies, the apartment will have an unpretentious look: cracked walls, uneven floors, etc.
If the rough work has been successful, you can start the final stage of the finish. At this stage, there is a painting or installation of a suspended ceiling, pasting walls with wallpaper or applying other coatings on them, laying laminate, linoleum, tiles or parquet. Plumbing and electrical appliances are also installed at the stage of finishing.
