The hood of the rod is produced on a rotary-exhaust machine model 5030, where it is fed in a box along the rollergeng from the sandblasting machine.
The machine consists of two traverse 1 and 3 with rollergeng 2 four hydraulic cylinders to fix the box and movement of the traverse 4, cradle 5, two racks 7 and hydraulic equipment located in the box 6. Traverses with long guides provide the accuracy of the hood with a slow move in the beginning and followed by an automatic transition to a fast hood. The length of the core boxes is not limited, the width is not more than 1524 mm, the maximum height between the squeezed traverses 1753 mm, the duration of the cycle 30 seconds. Hydraulic drive loading capacity of 2265 kg.
For the manufacture of rods in mass production, a sandstone automatic machine with the pneumatic control of the flexiblomatic model is used. All operations in the machine are automatically carried out with the exception of the location of the drivers and the removal of the finished rod. The working tank of the car with a voroshka in the lower part is mobile and can be filled with any of the two pairs of loading funnels located on both sides of the duthevo valve. Two core boxes are simultaneously on the car in the work, of which info is produced into one, and from the other at the same time, the rod is extracted.
A slab with a box after an infusion is transmitted by a lever-chloride mechanism through a bromic rollerhead on a rotary-exhaust mechanism, where the driver is superimposed on the box and is clamped by the mechanism. After turning the double -sided cradle, the second box is supplied to the infection, and from the first rod is extracted and collishes on the receiving table. In the presence of a double-sided rotary-exhaust mechanism, the productivity of the machine reaches 240 rods per hour.
For the manufacture of rods weighing up to 57 kg in the mass production of rods, the ER-221 Satter Production K0 (USA) is also used. This machine is arranged similarly to the Flexiblomik machine and is distinguished by the presence of two working tanks, from which one is filled with a core mixture, and the second at the same time is in the position of contamination, which gives an increase in performance and by the car they get up to 250 rods per hour.