For several centuries, zinc has been used in the production of building materials, moreover, in a predominantly, roofing coatings. Some new developments appear annually, there is an improvement in all the physical and technical characteristics of those materials that we all know, but it is zinc that is still the most durable component that is used in the process of making roofing coatings. Metal, whatever it may be, has its drawbacks and has some advantages. Zinc – that metal that does not differ in its ideal. For this very reason, they use zinc in the production of zinc at all in its pure form, but give their preference to alloys. Only due to the fact that a small amount of copper and aluminum, titanium are added to the alloy, the entire original fragility in the pure form of zinc is noticeably compensated. The metal in this way acquires precisely the very stiffness that is needed.
Zinc-Titan, the same alloy that is highly resistant to precipitation and corrosion. In addition, it is this metal that is absolutely safe for humans and in general for the environment.
The device of such a roof is produced only by roofers that have many years of experience with such material. During the installation of such a roof, all technologies should be observed, the most accurate calculations must be performed in advance, and in addition, you need to own all the features of physical and technical material. As an example, you need to know that working with this material is not permissible if the ambient temperature is below five degrees Celsius, because there is an unusually fragile alloy allocation. In the process of flexion of the material, it is worth excluding the formation of very sharp corners. In addition, in work with such materials, the use of those tools that can deeply damage the material is unacceptable.
This is all the convenience of such material that there are several ways to perform its installation. The entire choice of installation method only depends on what qualifications those roofers that you invited to work, what preferences the customer expresses directly. It is precisely the installation method as soft soldering that can fully ensure the tightness of the seams is used. In addition, it is permissible to use folding, gluing and bending, laying overlapping.
