Before decorating a house from aerated concrete, the surface must be treated with a primer. After drying the composition on the walls, you can apply a plaster mixture. It is also necessary to reinforce the net. Without this, window and door slopes will not hold firmly. After application, the plaster should be wetted with water so that it does not dry out.
For decoration of the facade, you can use siding. This is a heat -resistant material that has moisture -proof properties. For insulation, foam or mineral wool is used. The use of siding allows you to get a ventilated facade.
Also, the facade of the building can be lined with a stone. Flexible ligaments resistant to corrosion are used to install insulation. Before installing metal binders, they should be treated with a primer. In aerated concrete, it is necessary to drill holes for the installation of reinforcement. This is done during facing work to get to the seam of the brick. Between the insulation and the cladding, you need to leave the gap to prevent the development of the fungus.
The most economical option for decorating the facade is the use of vapor -permeable putty and colors. You can add the desired color to the mixture. To apply the composition, use a brush and a roller. If irregularities have formed during the decoration of the facade, they need to be wiped. To polish the protrusions, use a rubble.
The house can be insulated with polystyrene, and then put the material and paint. Foam panels are fixed to glue and dowels. The seams between the plates are sealed with tile glue. The plane is reinforced with a fiberglass net and finished with putty.
