After you have decided on a type of roofing material, you will need to choose a special tool. Among all known construction tools, certain varieties are most often used for roofing work.
In any case, the main tool will be a hammer. Moreover, it can be of various types: a handbrake, a hook, figured or a hammer-chick. And such a hammer as a kiyanka will be used with a bite and a chipper.
In order to mark and determine the size of the necessary materials, you will need tools such as Kerner, as well as roulette. All materials and beams will help to raise the jack, and if a putty, primer or painting is provided in the process of roofing, then a spatula will be needed here.
So that it could cut leaf iron, metal parts or steel, we need scissors for metal or special roofing scissors. At the same time, according to the location of the cutting blade, such scissors can be as left -handed, and right -handed. For left -handed scissors, the blade will be located on the right, and for right -handed – on the left. For example, left -handed scissors are used in order not only to cut off the material, but also to perform various holes.
The necessary tool in the construction of the roof is also a saw that helps to drink wood and cut the metal. During the construction of the roof, use ribbon or disk type saws. In order to cut a bar or file rods, a hacksaw may be needed, and such a tool as a file as a file will come in handy for sample the upper layer of the working material. After that, with the help of another tool – a stack, you can smooth out all the edges of sharp parts.
You may need an ax with which you can cut large pieces of wood. And such interesting tools such as Zenzubel and Falzgebel are used so that you can process, clean and choose a quarter.
A special tool is roofing ticks, which, unlike their classic counterparts, are intended not to be pulled out with their help, but so that you can bent the edges of metal sheets from a certain angle. And you can fasten such metal sheets with each other due to such a tool as a rivet.
