Split systems are installed in almost every modern car. They are intended to maintain optimal temperature and humidity in the cabin, which increases movement safety. But such systems require regular maintenance. It can be carried out in a specialized service or your own. In the latter case, you will need, for example, a car conditioner cleaner.
Basic nuances and procedures
To begin with, carefully examine the engineering space: the leaks of the oil of the split system, the freon at the joints of the coolant pipe, and the pr. If minor defects are found, cold welding for plastic may come in handy. It will be able to use it even in people without special skills, it is only important to clearly follow the instructions.
Next, you need to remove the cabin filter, it must be replaced. The car ducts are located behind it. They need to squeeze out the entire cylinder of special cleaning foam. Read the instructions carefully before using. So that the product does not flow in the opposite direction, you can build a valve from the old filter: cut a hole for the hose, insert into the same place. The nozzle of the balloon is sent to this hole.
After spraying the entire product, you usually need to wait 15-20 minutes.
At the end, you will see a puddle under the car – this means that the cleansing composition has passed through the entire system and resulted in it already in the form of condensate. Now you can insert a new salon filter in place and enjoy clean air in the car. In conclusion, it should be noted that it is recommended to perform these actions at least once a year.
