The laminate is the material, the use of which provides for preliminary thorough leveling of the surface on which it will be laid. At the same time, the tree can also be perfectly suitable as the basis, if it was already mounted in the room to need to be carefully measured, to identify all the flaws in order to carry out their timely elimination. For these purposes, such a simple tool is used, as a rule. Its length should be at least two meters in order to be able to get a more complete idea of the condition of the coating. For each meter, the changes in heights should be no more than 3 mm. In this case, you can lay the laminate to coating in the state in which it is located. Large in size of the changes require a set of work to eliminate them. At the same time, the choice of one or another technology depends on the magnitude of these changes and deformations.
If irregularities do not exceed each meter of 5 mm, you can limit yourself to grinding with the help of the simplest tools. This work is available even for a person who does not have special skills. With more significant irregularities, it is necessary to use an electric rubbish, which provides for certain skills in work, so that the coating is perfectly even, without the effect of a ladder. To simplify the work, alignment with plywood on top of the tree can be used. Also, before laying the laminate, it is necessary to use the substrate.
When conducting the necessary preparation, the use of a tree as a basis for laminate is justified, since it is a natural insulation and is beneficial from an economic point of view for the repair of an apartment.
